# bindings/octave/CMakeLists.txt for PLplot
###
### Process this file with cmake to produce Makefile
###
# Copyright (C) 2006 Alan W. Irwin
#
# This file is part of PLplot.
#
# PLplot is free software; you can redistribute it and/or modify
# it under the terms of the GNU Library General Public License as published
# by the Free Software Foundation; version 2 of the License.
#
# PLplot is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU Library General Public License for more details.
#
# You should have received a copy of the GNU Library General Public License
# along with PLplot; if not, write to the Free Software
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301  USA

# Build and install octave interface to PLplot and octave PLplot examples.
if(ENABLE_octave)

  add_subdirectory(PLplot)
  add_subdirectory(misc)

  # Install renamed documentation files.
  set(docfiles
    BUGS
    FGA
    INSTALL
    README
    ToDo
    USAGE
    )
  foreach(doc ${docfiles})
    install(FILES ${doc} DESTINATION ${DOC_DIR} RENAME ${doc}.octave)
  endforeach(doc ${docfiles})

  # This is a representative generated (or prebuilt) octave documentation file.
  # There are more than a hundred of these *.txt files.  If the (unlikely)
  # event that the plinit command is no longer part of the PLplot API, this
  # representative file would have to be changed.
  set(rep_doc plinit.txt)

  if(EXISTS ${CMAKE_CURRENT_SOURCE_DIR}/plplot_octave_txt/${rep_doc})
    # Octave documentation has been prebuilt in the (tarball) source tree.
    # Copy it to the build tree if that tree is different from source tree.
    if(NOT CMAKE_BINARY_DIR STREQUAL "${CMAKE_SOURCE_DIR}")
      add_custom_command(
	OUTPUT ${CMAKE_CURRENT_BINARY_DIR}/plplot_octave_txt/${rep_doc}
	COMMAND ${CMAKE_COMMAND} -E copy_directory
	${CMAKE_SOURCE_DIR}/bindings/octave/plplot_octave_txt
	${CMAKE_BINARY_DIR}/bindings/octave/plplot_octave_txt
	)
    endif(NOT CMAKE_BINARY_DIR STREQUAL "${CMAKE_SOURCE_DIR}")
    set(make_documentation_DEPENDS
      ${CMAKE_CURRENT_BINARY_DIR}/plplot_octave_txt/${rep_doc}
      )
  else(EXISTS ${CMAKE_CURRENT_SOURCE_DIR}/plplot_octave_txt/${rep_doc})
    # Generate full on-line help for plplot_octave
    file(MAKE_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}/plplot_octave_txt)
    add_custom_command(
      OUTPUT ${CMAKE_CURRENT_BINARY_DIR}/plplot_octave_txt/plplot.doc
      COMMAND ${CMAKE_COMMAND} -E copy
      ${CMAKE_CURRENT_SOURCE_DIR}/etc/plplot.doc
      ${CMAKE_CURRENT_BINARY_DIR}/plplot_octave_txt/plplot.doc
      DEPENDS
      ${CMAKE_CURRENT_SOURCE_DIR}/etc/plplot.doc
      )
    if(PERL_XML_DOM AND PERL_XML_PARSER)
      add_custom_command(
	OUTPUT ${CMAKE_CURRENT_BINARY_DIR}/plplot_octave_txt/${rep_doc}
	COMMAND ${PERL_EXECUTABLE}
	${CMAKE_SOURCE_DIR}/doc/docbook/bin/api2text.pl
	${CMAKE_SOURCE_DIR}/doc/docbook/src/plplotdoc.xml.in
	${CMAKE_SOURCE_DIR}/doc/docbook/src/api.xml
	DEPENDS 
	${CMAKE_CURRENT_BINARY_DIR}/plplot_octave_txt/plplot.doc
	${CMAKE_SOURCE_DIR}/doc/docbook/bin/api2text.pl
	${CMAKE_SOURCE_DIR}/doc/docbook/src/plplotdoc.xml.in
	${CMAKE_SOURCE_DIR}/doc/docbook/src/api.xml
	WORKING_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}/plplot_octave_txt
	)
      
      set(make_documentation_DEPENDS
	${CMAKE_CURRENT_BINARY_DIR}/plplot_octave_txt/${rep_doc}
	)
    else(PERL_XML_DOM AND PERL_XML_PARSER)
      message(STATUS 
	"WARNING: Perl modules XML::Parser and/or XML::DOM not available\n"
	"   so cannot generate full online help for plplot_octave"
	)
      set(make_documentation_DEPENDS
	${CMAKE_CURRENT_BINARY_DIR}/plplot_octave_txt/plplot.doc
	)
    endif(PERL_XML_DOM AND PERL_XML_PARSER)
  endif(EXISTS ${CMAKE_CURRENT_SOURCE_DIR}/plplot_octave_txt/${rep_doc})

  add_custom_target(
    make_documentation ALL
    DEPENDS ${make_documentation_DEPENDS}
    )

  # Configure source code for octave interface to PLplot.
  configure_file(
    ${CMAKE_CURRENT_SOURCE_DIR}/plplot_octave.h.in
    ${CMAKE_CURRENT_BINARY_DIR}/plplot_octave.h
    @ONLY
    )
  configure_file(
    ${CMAKE_CURRENT_SOURCE_DIR}/octave_version.pl.in
    ${CMAKE_CURRENT_BINARY_DIR}/octave_version.pl
    @ONLY
    )
  configure_file(
    ${CMAKE_CURRENT_SOURCE_DIR}/octaverc.in
    ${CMAKE_CURRENT_BINARY_DIR}/.octaverc
    @ONLY
    )
  add_custom_command(
    OUTPUT 
    ${CMAKE_CURRENT_BINARY_DIR}/plplot_octave.cc 
    ${CMAKE_CURRENT_BINARY_DIR}/tmp_stub
    COMMAND ${PERL_EXECUTABLE}
    -I${MATWRAP_PATH} ${MATWRAP} 
    -language octave -o plplot_octave.cc -stub tmp_stub
    -cpp_ignore ${CMAKE_CURRENT_SOURCE_DIR} 
    -cpp_ignore ${CMAKE_CURRENT_SOURCE_DIR}/plplot_octave_rej.h
    -cpp ${CMAKE_C_COMPILER} -D__builtin_va_list=void -E 
    -I${CMAKE_CURRENT_SOURCE_DIR} -I${CMAKE_CURRENT_BINARY_DIR} -C plplot_octave.h
    DEPENDS
    ${CMAKE_CURRENT_BINARY_DIR}/plplot_octave.h
    )
  set_source_files_properties(${CMAKE_CURRENT_BINARY_DIR}/plplot_octave.cc
    PROPERTIES GENERATED ON)

  # Build octave interface.
  set(octave_interface_INCLUDE_PATHS
    ${CMAKE_SOURCE_DIR}/include
    ${CMAKE_BINARY_DIR}
    ${CMAKE_BINARY_DIR}/include
    ${CMAKE_CURRENT_SOURCE_DIR}
    ${CMAKE_CURRENT_BINARY_DIR}
    ${OCTAVE_INCLUDE_PATH}
    )
  include_directories(${octave_interface_INCLUDE_PATHS})

  add_library(plplot_octave MODULE ${CMAKE_CURRENT_BINARY_DIR}/plplot_octave.cc)
  target_link_libraries(
    plplot_octave
    plplot${LIB_TAG}
    "${OCTAVE_LIBRARIES}"
    "${OCTINTERP_LIBRARIES}"
    )

  if(USE_RPATH)
    get_target_property(LIB_INSTALL_RPATH plplot${LIB_TAG} INSTALL_RPATH)
    # (Reasonable) assumption here is that OCTAVE_LIBRARIES and
    # OCTINTERP_LIBRARIES have the same path.
    get_filename_component(OCTAVE_INSTALL_RPATH "${OCTAVE_LIBRARIES}" PATH)
    set(LIB_INSTALL_RPATH ${LIB_INSTALL_RPATH} ${OCTAVE_INSTALL_RPATH})
    set_target_properties(
      plplot_octave
      PROPERTIES
      PREFIX "" 
      SUFFIX ".oct"
      INSTALL_RPATH "${LIB_INSTALL_RPATH}"
      INSTALL_NAME_DIR "${OCTAVE_OCT_DIR}"
      )
  else(USE_RPATH)
    set_target_properties(
      plplot_octave
      PROPERTIES
      PREFIX "" 
      SUFFIX ".oct"
      INSTALL_NAME_DIR "${OCTAVE_OCT_DIR}"
      )
  endif(USE_RPATH)

  # Have to be specific about permissions for some reason (probably oct suffix).
  set(PERM_MODULES
    OWNER_READ
    OWNER_WRITE
    OWNER_EXECUTE
    GROUP_READ
    GROUP_EXECUTE
    WORLD_READ
    WORLD_EXECUTE
    )

  install(TARGETS plplot_octave
    EXPORT export_plplot
    LIBRARY
    DESTINATION ${OCTAVE_OCT_DIR}
    PERMISSIONS ${PERM_MODULES}
    )

  # Build and install plplot_stub.m
  add_executable(massage massage.c)
  get_target_property(
    massage_LOCATION
    massage
    LOCATION
    )

  file(WRITE ${CMAKE_CURRENT_BINARY_DIR}/plplot_stub.m_part2 
    "# It was also massaged to add online documentation\n"
    "# extracted from some PLplot distribution files\n"
    "\n"
    "1;\n"
    "\n"
    )
  add_custom_command(
    OUTPUT 
    ${CMAKE_CURRENT_BINARY_DIR}/plplot_stub.m
    ${CMAKE_CURRENT_BINARY_DIR}/missing_help
    COMMAND head -5 tmp_stub > plplot_stub.m
    COMMAND
    cat plplot_stub.m_part2 >> plplot_stub.m
    COMMAND cat ${CMAKE_CURRENT_SOURCE_DIR}/plplot_octave_def >> plplot_stub.m
    COMMAND echo >> plplot_stub.m
    COMMAND 
    ${massage_LOCATION} >> plplot_stub.m 2> missing_help
    DEPENDS
    ${CMAKE_CURRENT_BINARY_DIR}/tmp_stub
    ${CMAKE_CURRENT_SOURCE_DIR}/plplot_octave_def
    ${massage_LOCATION}
    ${make_documentation_DEPENDS}
    )

  add_custom_target(
    plplot_stub.m_built ALL
    DEPENDS
    ${CMAKE_CURRENT_BINARY_DIR}/plplot_stub.m
    )

  # Both these targets file-depend on custom commands which in turn
  # file-depend on ${make_documentation_DEPENDS}.  Therefore, must
  # serialize these custom targets so that parallel build jobs
  # don't interfere with each other.
  add_dependencies(plplot_stub.m_built make_documentation)

  # Need access elsewhere (examples/octave) to the file depends of
  # this custom target.
  set_property(GLOBAL PROPERTY 
    FILES_plplot_stub.m_built
    ${CMAKE_CURRENT_BINARY_DIR}/plplot_stub.m
    )

  install(FILES 
    ${CMAKE_CURRENT_BINARY_DIR}/plplot_stub.m
    DESTINATION ${PLPLOT_OCTAVE_DIR}
    )
endif(ENABLE_octave)
