From owner-FreeBSD-users-jp@jp.FreeBSD.org Fri Feb 28 10:22:53 2003
Received: (from daemon@localhost)
	by castle.jp.FreeBSD.org (8.11.6+3.4W/8.11.3) id h1S1MrV47690;
	Fri, 28 Feb 2003 10:22:53 +0900 (JST)
	(envelope-from owner-FreeBSD-users-jp@jp.FreeBSD.org)
Received: from kotoba.apl.pref.akita.jp (kotoba.apl.pref.akita.jp [211.120.125.70])
	by castle.jp.FreeBSD.org (8.11.6+3.4W/8.11.3) with SMTP/inet id h1S1Moi47685
	for <freebsd-users-jp@jp.freebsd.org>; Fri, 28 Feb 2003 10:22:52 +0900 (JST)
	(envelope-from yoshio@apl.pref.akita.jp)
Received: (qmail 1021 invoked from network); 28 Feb 2003 01:22:44 -0000
Received: from pop2.inside-apl (HELO pop2.apl.pref.akita.jp) (192.168.1.111)
  by kotoba.inside-apl with SMTP; 28 Feb 2003 01:22:44 -0000
Received: (qmail 26876 invoked from network); 28 Feb 2003 01:22:44 -0000
Received: from gate.inside-apl (192.168.1.254)
  by pop2.inside-apl with SMTP; 28 Feb 2003 01:22:44 -0000
Received: (from bin@localhost)
	by gate.inside-apl (8.9.2/3.7W) id KAA06271
	for <freebsd-users-jp@jp.freebsd.org>; Fri, 28 Feb 2003 10:22:44 +0900 (JST)
X-Authentication-Warning: gate.inside-apl: bin set sender to <yoshio@apl.pref.akita.jp> using -f
Received: from unknown(172.27.4.180) by gate.inside-apl via smap (V2.1)
	id xma006269; Fri, 28 Feb 03 10:22:35 +0900
Message-Id: <200302280120.AA00766@VL400.apl.pref.akita.jp>
From: Yoshio Funaki <yoshio@apl.pref.akita.jp>
To: freebsd-users-jp@jp.FreeBSD.org
MIME-Version: 1.0
X-Mailer: AL-Mail32 Version 1.12
Content-Type: text/plain; charset=iso-2022-jp
Reply-To: FreeBSD-users-jp@jp.FreeBSD.org
Precedence: list
Date: Fri, 28 Feb 2003 10:20:23 +0900
X-Sequence: FreeBSD-users-jp 73591
Subject: [FreeBSD-users-jp 73591] ACPI problem on 5.0R
Errors-To: owner-FreeBSD-users-jp@jp.FreeBSD.org
Sender: owner-FreeBSD-users-jp@jp.FreeBSD.org
X-Originator: yoshio@apl.pref.akita.jp
X-Distribute: distribute version 2.1 (Alpha) patchlevel 24e+030107

$B$*@$OC$K$J$C$F$*$j$^$9!#A%LZ!w=)ED8)N)?^=q4[$G$9!#(B
$B$H$j$"$($:!&!&!&$H;W$C$F!"0J2<$N4D6-$K(B5.0R$B$rF~$l$F$_$?$s$G$9$,(B
ACPI$B<~$j$G$5$5$j$^$9!#!!(B;_;

$B<+:n!!(BRIOWORKS PDVIA mother with pen3 1.0G*2
dmesg$B$O:G8e$K$D$1$F$*$-$^$9!#(B
p3$B$^$G>e$2!"(BSMP$B$K$7$F$"$k$N$G!"$=$N1F6A$,$I$&$J$N$+$OJ,$+$j$^$;$s$,(B
5.0R$B$N(BGENERIC KERNEL$B$G$bF1$8$G$7$?!#(B

$B$G!"(BUNIX USER 2003/3$B$K$b(BFreeBSD press No.15$B$K$b!"(BACPI$B<~$j$G;I$5$k$3$H$,$"$k(B
$B$H8@$&5-=R$,$"$C$?$N$G!"!I$"$d$7$$$J$!!I$H;W$$$D$D!"?MCl@:?@$G!&!&!&!!(B^^;

$B$G!"LdBjE@$*$h$S8=:_$N>lEv$?$j$N2r7h:v$H$7$F0J2<$N$h$&$K$7$F$^$9!#(B

$B$^$:!"(BUNIX USER$B$N5-=R$K=>$C$F(B/boot/kernel/acpi.ko$B$r(Brename$B$7$F(B
reboot$B$7$?>l9g$O!"$?$7$+$K(Bacpi$B$NF0:n$,M^@)$5$l$F!"LdBj$,H/@8$7$J$$$N$G$9$,(B
cvsup$B$7$F(Bmake installworld$B$9$k$H!"(Bacpi.ko$B$,(Binstall$B$5$l$k$N$G!"(Binstallworld
$B$9$k$?$S$K(Bacpi.ko$B$r(Brename$B$7$J$1$l$P$J$i$J$$$3$H$,H=L@$7$^$7$?!#$3$3$,LdBj!#(B

$B$G!"(BFreeBSD press$B$K(B/boot/device.hints$B$K(Bhint.acpi.0.disable="1"$B$r5-=R$9$k(B
$B$H8@$&J}K!$,:\$C$F$$$?$N$G!"$3$l$r;n$7$?$H$3$m!"(Bacpi$B$,M-8z$K$J$C$A$c$$$^$7$F(B
$B!t!!(Bacpi.ko$B$O85$KLa$7$?>e$G;n$7$^$7$?(B
$B$^$?$^$?;I$5$C$A$c$&$s$G$9!#$H$$$&$3$H$G!"$3$NJ}K!$,K\Ev$KM-8z$J$N$+!"$^$?(B
$B$?$^$?$^(BPDVIA$B$@$1$NLdBj$J$N$+$,ITL@!#(B

$B$H$$$&$3$H$G!"$$$^$N$H$3$m(B
/boot/kernel/acpi.ko$B$N(Brename
kernel config$B;~$K(Bdevice apm$B$rM-8z$K$7!"(Bkernel$B$N:n$jD>$7(B
/boot/device.hints$B$K(Bhint.apm.0.disabled="0"$B$r5-=R(B
/etc/rc.conf$B$K(Bapm_enable="YES"$B$r5-=R(B
$B$G$7$N$$$G$^$9$,!":G0-!"(BCD-ROM$B$G(Binstall$B$7$?D>8e$N(Breboot$B$O(BOK$B$G$b!"$=$N8e(B
kernel rebuild$B$7$F(Binstall & reboot$B$N;~!";I$5$k!J$3$H$b$"$k!K$N$G!"(B
boot$B;~!J#1#0ICBT$D;~!K$K(Bunload acpi_ko$B!J$3$3$O$&$m3P$($G<+?.$J$7!*!K$7$F(B
$B$d$i$J$$$H(Bboot$BESCf$G8G$^$k$3$H$,$"$j$^$9!#(B

$B<B5!$*$h$S;29M;qNA$,<j85$KL5$$>uBV$G=q$$$F$$$k$N$G!"(Btypo$BEy$"$k$+$bCN$l$^$;$s$,(B
$B<1<T$NJ}!9$+$i$N$465<(!u<(:6$r$*4j$$$$$?$7$^$9!#(B

-----------------------------------------------------
FreeBSD 5.0-RELEASE-p3 #0: Thu Feb 27 13:38:35 JST 2003
    yoshio@db.inside.home:/usr/obj/usr/src/sys/SMP
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0469000.
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (1007.05-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x686  Stepping = 6
  Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 536805376 (511 MB)
avail memory = 516685824 (492 MB)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): apic id:  0, version: 0x00040011, at 0xfee00000
 cpu1 (AP):  apic id:  1, version: 0x00040011, at 0xfee00000
 io0 (APIC): apic id:  2, version: 0x00170011, at 0xfec00000
Initializing GEOMetry subsystem
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
Using $PIR table, 10 entries at 0xc00fdba0
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
IOAPIC #0 intpin 19 -> irq 2
IOAPIC #0 intpin 16 -> irq 5
IOAPIC #0 intpin 17 -> irq 9
IOAPIC #0 intpin 18 -> irq 10
agp0: <VIA 82C691 (Apollo Pro) host to PCI bridge> mem 0xd0000000-0xd3ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C596 ATA66 controller> port 0xa000-0xa00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xa400-0xa41f irq 2 at device 7.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge, HOST-PCI> at device 7.3 (no driver attached)
ahc0: <Adaptec 2940 Ultra2 SCSI adapter> port 0xa800-0xa8ff mem 0xd9031000-0xd9031fff irq 5 at device 13.0 on pci0
aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs
atapci1: <Promise TX2 ATA100 controller> port 0xbc00-0xbc0f,0xb800-0xb803,0xb400-0xb407,0xb000-0xb003,0xac00-0xac07 mem 
0xd9020000-0
xd902ffff irq 9 at device 14.0 on pci0
ata2: at 0xac00 on atapci1
ata3: at 0xb400 on atapci1
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xc000-0xc03f mem 0xd9000000-0xd901ffff,0xd9030000-0xd9030fff irq 10 at 
device 15.0 on
pci0
fxp0: Ethernet address 00:02:b3:a9:d6:c1
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
orm0: <Option ROMs> at iomem 0xc9000-0xd17ff,0xc8000-0xc87ff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> flags 0x100 irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0401> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
Timecounters tick every 10.000 msec
ad0: 57241MB <ST360021A> [116301/16/63] at ata0-master UDMA66
ar0: 57220MB <ATA RAID1 array> [7294/255/63] status: READY subdisks:
 0 READY ad4: 57241MB <ST360021A> [116301/16/63] at ata2-master UDMA100
 1 READY ad6: 57241MB <ST360021A> [116301/16/63] at ata3-master UDMA100
Waiting 5 seconds for SCSI devices to settle
Opened disk ad4 -> 16
Opened disk ad4 -> 16
Opened disk ad6 -> 16
Opened disk ad6 -> 16
SMP: AP CPU #1 Launched!
Mounting root from ufs:/dev/ad0s1a
cd0 at ahc0 bus 0 target 1 lun 0
cd0: <PIONEER DVD-ROM DVD-303 1.09> Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 8)
cd0: Attempt to query device size failed: NOT READY, Medium not present

----
Yoshio Funaki  yoshio@apl.pref.akita.jp
