From owner-FreeBSD-users-jp@jp.freebsd.org  Tue May 19 03:19:30 1998
Received: by jaz.jp.freebsd.org (8.8.8+3.0Wbeta13/8.7.3) id DAA28452
	Tue, 19 May 1998 03:19:30 +0900 (JST)
Received: by jaz.jp.freebsd.org (8.8.8+3.0Wbeta13/8.7.3) with ESMTP id DAA28446
	for <freebsd-users-jp@jp.freebsd.org>; Tue, 19 May 1998 03:19:28 +0900 (JST)
Received: from is19e1s01.jaist.ac.jp (Mamoru Iwaki <iwaki@jaist.ac.jp>) by mikan.jaist.ac.jp (8.7.5); id DAA10391; Tue, 19 May 1998 03:19:26 +0900 (JST)
Received: by is19e1s01.jaist.ac.jp (4.1/JE-C); Tue, 19 May 98 03:19:25 JST
Date: Tue, 19 May 98 03:19:25 JST
Message-Id: <9805181819.AA03614@is19e1s01.jaist.ac.jp>
To: freebsd-users-jp@jp.freebsd.org
In-Reply-To: Your message of "Tue, 19 May 1998 01:47:27 JST".
	<199805181647.BAA23392@jaz.jp.freebsd.org>
From: iwaki@jaist.ac.jp (Mamoru Iwaki)
X-Mailer: mnews [version 1.21] 1997-12/23(Tue)
Reply-To: FreeBSD-users-jp@jp.freebsd.org
Precedence: bulk
X-Distribute: distribute [version 2.1 (Alpha) patchlevel=24]
X-Sequence: FreeBSD-users-jp 28432
Subject: [FreeBSD-users-jp 28432] Re: floating point exception 
Errors-To: owner-FreeBSD-users-jp@jp.freebsd.org
Sender: owner-FreeBSD-users-jp@jp.freebsd.org

$B4d>k!w(BJAIST$B$G$9!#(B

In article <199805181647.BAA23392@jaz.jp.freebsd.org>
owner-freebsd-users-jp-digest@jp.freebsd.org wrote:

>> Message-Id: <199805181646.BAA17806@exelion.yk.rim.or.jp>
>> From: Takaaki Nomura (=?ISO-2022-JP?B?GyRCTG5CPDliTEAbKEI=?= ) <amadeus@yk.rim.or.jp>
>> Date: Tue, 19 May 1998 01:46:50 +0900

>> >$B;d$b(BVirge/VX$B$r;H$C$F$$$^$9$,!"(BXF86_SVGA$B$C$F$3$l$KBP1~$7$F$$$^$7$?$+!)(B
 
>> $BBP1~$7$F$$$^$9!#(BXF86_S3V $B$O8E$$$N$G!"(BXF86_SVGA $B$r;H$C$F2<$5$$!#(B
>> 
>> README.S3V $B$K$O!"<!$N$h$&$K=q$$$F$"$j$^$9!#(B
>> 
>> >3.  XF86_SVGA server
>> >
>> >The XF86_SVGA ViRGE driver supports all current flavors of the S3 ViRGE
>> >chipset.  It uses the XAA acceleration architecture for acceleration, and
>> >allows color depths of 8, 15, 16, 24 and 32 bpp. It has been tested on several
>> >2MB and 4MB ViRGE cards, a 4MB ViRGE/DX card and a ViRGE/VX card. Resolutions

$BFI$_D>$7$^$7$?!#3N$+$K=q$$$F$"$j$^$9$M!#;d$N5-210c$$$G$7$?!#8f;XE&$"(B
$B$j$,$H$&$I$6$$$^$7$?!#$-$C$H$3$l$+$i$O(BXF86_SVGA$B$K0lK\2=$5$l$F$$$/$N(B
$B$G$7$g$&$M!#$G$b!"(B

The following sections describe details of ViRGE support.  Be aware that there
are two servers described.  XF86_S3V is the ViRGE specific server and was cre-
ated first.  The new acceleration architecture support is found in the
XF86_SVGA server using the s3_virge driver.  Each has strengths and weaknesses.

$B$H$b=q$$$F$"$j$^$9$M!#8=;~E@$G$O$^$@$=$l$>$l0lD90lC;$J$N$G$O$J$$$G$7$g(B
$B$&$+!);d$N>l9g$O!"$?$^$?$^(BXF86_S3V$B$KD9$,$"$kNc$@$C$?$N$+$bCN$l$^$;$s!#(B
$B!t(B1152x900 32bpp $BLs(B90kHz-refresh$B$G;H$C$F$$$k$N$G!"$=$NJQ$,2x$7$$$N$G(B
$B!t$9$,!"!"!"(BXF86_S3V$B$G$O0BDj$7$FF0$$$F$$$^$9!#(B

>> Linux $B>e$G<h$C$?%m%0$G$9$,!"IU$1$F$*$-$^$9!#(B

$B$$$m$$$m$J%*%W%7%g%s$,$"$k$s$G$9$M!":#EY$^$?;n$7$F$_$?$$$H;W$$$^$9!#(B
$B$D$$$G$K;d$N>l9g$N%m%0$r0J2<$KE:IU$7$^$9!#!J(BX$B$O(Bports-current$B$+$i%3%s(B
$B%Q%$%k$7$^$7$?!#!K(B

XFree86 Version 3.3.2 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: March 2 1998
        If the server is older than 6-12 months, or if your card is
newer
        than the above date, look for a newer version before
reporting
        problems.  (see http://www.XFree86.Org/FAQ)
Operating System: FreeBSD 2.2.6-STABLE i386
Configured drivers:
  S3V: accelerated server for S3 graphics adaptors (Patchlevel 0)
      s3_ViRGE
Using syscons driver with X support (version 2.0)
(using VT number 4)

XF86Config: /etc/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) module xf86Elo.so successfully loaded from
/usr/X11R6/lib/modules
(**) module xf86Jstk.so successfully loaded from
/usr/X11R6/lib/modules
(**) module xf86Wacom.so successfully loaded from
/usr/X11R6/lib/modules
(**) module xf86Summa.so successfully loaded from
/usr/X11R6/lib/modules
        PEX extension module for XFree86 3.3.2
(**) module pex5.so successfully loaded from /usr/X11R6/lib/modules
        XIE extension module for XFree86 3.3.2
(**) module xie.so successfully loaded from /usr/X11R6/lib/modules
(**) XKB: keycodes: "xfree86"
(**) XKB: types: "default"
(**) XKB: compat: "default"
(**) XKB: symbols: "us(pc101)"
(**) XKB: geometry: "pc"
(**) XKB: rules: "xfree86"
(**) XKB: model: "pc101"
(**) XKB: layout: "us"
(**) Mouse: type: MouseSystems, device: /dev/sysmouse, baudrate:
1200
(**) Mouse: buttons: 3, 3 button emulation (timeout: 50ms)
(**) S3V: Graphics device ID: "Primary Card"
(**) S3V: Monitor ID: "Primary Monitor"
Warning: 'fonts.dir' not found (or not valid) in
"/usr/X11R6/lib/X11/fonts/PEX".
          Entry deleted from font path.
          (Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/PEX").
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/100dpi,/usr/X11R6/lib/X11/fonts/7
5dpi,/usr/X11R6/lib/X11/fonts/Speedo,/usr/X11R6/lib/X11/fonts/Type1,/usr/X11R6/l
ib/X11/fonts/cyrillic,/usr/X11R6/lib/X11/fonts/freefont,/usr/X11R6/lib/X11/fonts
/misc,/usr/X11R6/lib/X11/fonts/non-cjk"
(--) S3V: PCI: ViRGE/VX rev 2, Linear FB @ 0xf8000000
(**) S3V: Option "power_saver"
(--) S3V: chipset:   ViRGE/VX rev. 2
(--) S3V: chipset driver: s3_ViRGE
(--) S3V: videoram:  4096k (plus 4096k off-screen)
(--) S3V: Ramdac type: s3_trio64
(--) S3V: Ramdac speed: 220 MHz  (135 MHz for 32 bpp)
(--) S3V: Using Trio32/64 programmable clock (MCLK 50.114 MHz)
(--) S3V: Maximum allowed dot-clock: 135.000 MHz
(**) S3V: Mode "1152x900": mode clock = 135.000
(--) S3V: There is no mode definition named "1600x1200"
(--) S3V: Removing mode "1600x1200" from list of valid modes.
(--) S3V: There is no mode definition named "1280x1024"
(--) S3V: Removing mode "1280x1024" from list of valid modes.
(--) S3V: There is no mode definition named "1152x864"
(--) S3V: Removing mode "1152x864" from list of valid modes.
(--) S3V: There is no mode definition named "1024x768"
(--) S3V: Removing mode "1024x768" from list of valid modes.
(--) S3V: There is no mode definition named "800x600"
(--) S3V: Removing mode "800x600" from list of valid modes.
(**) S3V: Mode "640x480": mode clock =  45.800
(--) S3V: There is no mode definition named "640x400"
(--) S3V: Removing mode "640x400" from list of valid modes.
(--) S3V: There is no mode definition named "512x384"
(--) S3V: Removing mode "512x384" from list of valid modes.
(--) S3V: There is no mode definition named "480x300"
(--) S3V: Removing mode "480x300" from list of valid modes.
(--) S3V: There is no mode definition named "400x300"
(--) S3V: Removing mode "400x300" from list of valid modes.
(--) S3V: There is no mode definition named "320x240"
(--) S3V: Removing mode "320x240" from list of valid modes.
(--) S3V: There is no mode definition named "320x200"
(--) S3V: Removing mode "320x200" from list of valid modes.
(**) S3V: Using packed 24 bpp.  Color weight: 888
(--) S3V: Virtual resolution set to 1152x900
(--) S3V: Local bus LAW is 0xF80xxxxx
(--) S3V: Using a banksize of 4096k, line width of 1152
---
-----
 $BKLN&@hC<2J3X5;=QBg3X1!Bg3X(B $B>pJs2J3X8&5f2J(B
 $B4d>k(B $B8n(B (iwaki@jaist.ac.jp)
